How to Replace Dodge Journey Key Battery
Replacing the battery in your Dodge Journey key can be a straightforward process, especially if you follow the right steps. Whether your key battery has run out or you simply want to replace it with a new one, this guide will walk you through the process step by step.
Materials Needed:
Before you begin, gather the following materials:
– New key battery (check your vehicle’s manual for the correct size and type)
– Small flathead screwdriver
– Replacement key (if necessary)
Step 1: Remove the Key Fob
1. Start by opening the Dodge Journey’s driver’s door.
2. Locate the key fob on the driver’s side door.
3. Gently press the release button on the key fob and pull it out of the door.
Step 2: Remove the Battery Compartment Cover
1. Look for the battery compartment cover on the back of the key fob.
2. Use the small flathead screwdriver to remove the screws holding the cover in place.
3. Carefully remove the cover to expose the battery.
Step 3: Remove the Old Battery
1. Take out the old battery from the compartment.
2. Make sure to note the orientation of the old battery before removing it, as this will help you to install the new battery correctly.
Step 4: Install the New Battery
1. Place the new battery into the compartment, ensuring that it is oriented in the same way as the old battery.
2. Gently press the battery into place until it clicks into the compartment.
Step 5: Reassemble the Key Fob
1. Replace the battery compartment cover.
2. Secure the cover with the screws using the flathead screwdriver.
3. Reinsert the key fob into the driver’s door.
Step 6: Test the Key
1. Close the driver’s door.
2. Try the key to ensure that it works properly with your Dodge Journey.
Conclusion:
Replacing the Dodge Journey key battery is a simple task that can be done in just a few minutes. By following these steps, you can ensure that your key works as it should and that you’re prepared for any future battery issues. Remember to keep the new battery in a safe place for future replacements.
