How to Change Turn Signal Bulb Dodge Journey
When it comes to maintaining your Dodge Journey, one of the essential tasks is to replace the turn signal bulb when it burns out. This simple procedure can be done by anyone with basic mechanical skills and a few tools. In this article, we will guide you through the step-by-step process of how to change the turn signal bulb in your Dodge Journey.
Before you begin, make sure you have the following tools and materials:
- Replacement turn signal bulb
- Phillips screwdriver
- Flashlight
- Wiper blade (to hold the bulb in place if necessary)
Step 1: Park your Dodge Journey on a flat surface and turn off the engine. Make sure the parking brake is engaged to prevent the vehicle from rolling.
Step 2: Open the hood of your Dodge Journey by pulling the lever located on the driver’s side of the car. Once the hood is open, locate the battery and disconnect the negative terminal to prevent any electrical shorts.
Step 3: Identify the turn signal bulb assembly. In most Dodge Journeys, the turn signal bulb is located on the side of the headlight assembly. Use the flashlight to locate the bulb, as it may be difficult to see in the dark.
Step 4: Using the Phillips screwdriver, remove the screws that secure the turn signal bulb assembly. Gently pull the assembly out of its socket.
Step 5: Take the old turn signal bulb out of the assembly. Be careful not to touch the glass part of the bulb with your fingers, as oils from your skin can cause the bulb to fail prematurely.
Step 6: Insert the new turn signal bulb into the assembly. If the bulb is tight, use the wiper blade to hold it in place while you reassemble the turn signal bulb assembly.
Step 7: Reattach the turn signal bulb assembly to the headlight assembly using the Phillips screwdriver. Make sure the assembly is securely fastened.
Step 8: Reconnect the negative terminal of the battery and close the hood of your Dodge Journey.
Step 9: Test the turn signal to ensure the new bulb is working correctly. If the turn signal works as expected, you have successfully changed the turn signal bulb in your Dodge Journey.
Remember, regular maintenance such as replacing the turn signal bulb can help ensure the safety of your vehicle and prevent accidents caused by non-functioning turn signals. By following these simple steps, you can keep your Dodge Journey in top condition.
